Back to top
 

Technologies of the Different Parts
of a Gas and Fuel Combined Cycle

TRAINING OBJECTIVE

 

PEDAGOGY

Know how to operate a combined cycle thanks to a comprehensive understanding of

  • the technologies of the different parts of the machine
  • the monitoring of process parameters
  • the safety of the operation
 
  • Theoretical and practical training on the clients' installations
  • Use of videos and industrial examples
  • Individual testing of knowledge at the end of the course

Length of the course: 5 days

TRAINING PROGRAM

  • The suction box (air filters, anti-icing, fogging, bleed heating, security clappets, etc.)
  • Air filters (characteristics, mesh, monitoring, cleaning, etc.)
  • The IGV (operation, maintenance, specifications, etc.)
  • The compressor (lubrication, anti-surge valves, cooling, etc.)
  • The combustion chamber (different types of combustion chamber and burners, environmental, etc.)
  • The expansion turbine (lubrication, bearing, cooling, etc.)
 
  • The recovery boiler (different types, post-combustion, economizer, drum, spray, heaters, reheaters, desuperheater, vents and drains, security organs, etc.)
  • The steam turbine (inlet valves, different body, sealing, lubrication, turning gear, control and security of oil, clutch, condenser, cooling system etc.)
  • The alternator (rotor, stator, excitation, lubrication, sealing circuit, cooling, etc.)
  • The transformer (cooling, security organs, etc.)
  • the electrical supply (main supply, secondary and emergency, emergency diesel, breaker, switchgear, etc.)

TRAINING OBJECTIVE

Know how to operate a combined cycle thanks to a comprehensive understanding of

  • the technologies of the different parts of the machine
  • the monitoring of process parameters
  • the safety of the operation

PEDAGOGY

  • Theoretical and practical training on the clients' installations
  • Use of videos and industrial examples
  • Individual testing of knowledge at the end of the course

Length of the course: 5 days

TRAINING PROGRAM

  • The suction box (air filters, anti-icing, fogging, bleed heating, security clappets, etc.)
  • Air filters (characteristics, mesh, monitoring, cleaning, etc.)
  • The IGV (operation, maintenance, specifications, etc.)
  • The compressor (lubrication, anti-surge valves, cooling, etc.)
  • The combustion chamber (different types of combustion chamber and burners, environmental, etc.)
  • The expansion turbine (lubrication, bearing, cooling, etc.)
  • The recovery boiler (different types, post-combustion, economizer, drum, spray, heaters, reheaters, desuperheater, vents and drains, security organs, etc.)
  • The steam turbine (inlet valves, different body, sealing, lubrication, turning gear, control and security of oil, clutch, condenser, cooling system etc.)
  • The alternator (rotor, stator, excitation, lubrication, sealing circuit, cooling, etc.)
  • The transformer (cooling, security organs, etc.)
  • the electrical supply (main supply, secondary and emergency, emergency diesel, breaker, switchgear, etc.)